ANNEX 1 

PROCEDURES FOR THE INSPECTION OF COVERED OBJECTS, CONTAINERS,
LAUNCH CANISTERS, VEHICLES, AND STRUCTURES 

1. Inspectors shall have the right to confirm the numbers, and, if applicable, types, variants or versions of
items of inspection that are specified for the facility to be inspected and declared for the inspection site
in accordance with paragraph 8 of Section VII or paragraph 6 of Section X of this Protocol, and to
confirm the absence of any other item of inspection at the inspection site. For this purpose in carrying
out the procedures for inspections provided for in this Annex the size criteria provided in paragraph 23
of Section VI of this Protocol shall be used. 

2. For an item of inspection that is outside a container or launch canister and that is not covered or
environmentally protected, inspectors shall have the right to confirm that the item of inspection is an item
of inspection of the declared type, and if applicable, variant or version by external viewing and by
measurement of its dimensions at locations on the item of inspection designated by a member of the
in-country escort. Upon completion of such viewing and measurements, the item of inspection shall not
be subject to further inspection. 

3. For an object that is outside a container or launch canister and that is not covered or environmentally
protected, inspectors shall have the right to confirm by external viewing and by measurement of its
external dimensions at locations on the object designated by a member of the in-country escort that it is
not an item of inspection. 

4. For a covered or environmentally protected object, a member of the in-country escort shall
demonstrate to the satisfaction of inspectors that such an object is an item of inspection of the declared
type, and if applicable, variant or version, or that it is not an item of inspection. At the choice of a
member of the in-country escort, inspectors shall have the right to carry out one or more of the following
procedures: 

(a) View the covered or environmentally protected object from a place designated by a member of the
in-country escort after a member of the in-country escort has partially or, if necessary, completely
removed the cover or environmental protection: 

(i) If, by viewing, inspectors confirm that the object is not an item of inspection, a container, or a launch
canister, that object shall not be subject to further inspection. 

(ii) If, by viewing, inspectors are unable to confirm that the object is not an item of inspection, inspectors
shall have the right to carry out the procedures provided for in paragraph 3 of this Annex. 

(iii) If, by viewing, inspectors confirm that the object is an item of inspection, a container or a launch
canister, inspectors shall have the right to carry out the procedures provided for in paragraph 2, 5, 6, or 7
of this Annex. 

(b) Measure the dimensions of the covered or environmentally protected object: 

(i) If, by making such measurements, inspectors confirm that the object is not large enough to contain or
to be an item of inspection, that object shall not be subject to further inspection. 

(Ii) If, by making such measurements, inspectors confirm that the object is large enough to contain or to
be an item of inspection, inspectors shall have the right to carry out the procedures provided for in
subparagraph (a) of this paragraph. 

5. For a container, a member of the in-country escort shall demonstrate to the satisfaction of inspectors
that the container contains an item of inspection of the declared type and, if applicable, variant of the
type, or that it does not contain an item of inspection. At the choice of a member of the in-country
escort, inspectors shall have the right to carry out one or more of the following procedures: 

(a) Make measurements of the dimensions of the container: 

(i) If, by making such measurements inspectors confirm that, by its dimensions, the container is not large
enough to contain an item of inspection, the container shall not be subject to further inspection. 

(Ii) If, by making such measurements inspectors confirm that, by its dimensions, the container is large
enough to contain an item of inspection, inspectors shall have the right to carry out procedures provided
for in subparagraph (b) or (c) of this paragraph. 

(b) View the interior of the container after a member of the in-country escort has opened the container,
and, as necessary, measure the dimensions of its contents: 

(i) If, by viewing the interior of the container and measuring the dimensions of its contents, inspectors
confirm that the item of inspection is an item of inspection of the declared type or confirm that the
container does not contain an item of inspection, the container shall not be subject to further inspection. 

(Ii) If, by viewing the interior of the container and measuring the dimensions of its contents, inspectors
are unable to confirm that the item of inspection is an item of inspection of the declared type or unable
to confirm that the contents of the container are not an item of inspection, inspectors shall have the right
to carry out procedures provided for in subparagraph (c) of this paragraph. 

(c) View the contents of the container, after a member of the in-country escort has removed the
contents from the container: 

(i) If, by viewing the contents of the container, inspectors confirm that the contents of the container are
not an item of inspection, the container shall not be subject to further inspection. 

(Ii) If, by viewing the contents of the container, inspectors confirm that the contents of the container are
an item of inspection or an unidentified object, inspectors shall have the right to carry out procedures
provided for in paragraph 2 or 3 of this Annex. 

6. For a launch canister that is declared to contain an item of inspection, a member of the in-country
escort shall demonstrate to the satisfaction of inspectors that the launch canister is a launch canister for
an item of the declared type. Inspectors shall have the right to view such a launch canister and, at
locations on the launch canister designated by a member of the in-country escort, make measurements
of its dimensions to confirm that those dimensions correspond to the dimensions specified for an item of
the declared type. Upon completion of the viewing and the measurements, the launch canister shall not
be subject to further inspection. 

7. For a launch canister declared not to contain an item of inspection, a member of the in-country escort
shall demonstrate to the satisfaction of inspectors that the launch canister does not contain an item of
inspection. At the choice of a member of the in-country escort, inspectors shall have the right to carry
out one or more of the following procedures: 

(a) View the interior of the launch canister after a member of the in-country escort has opened the
launch canister, by removing at least one of the end caps from the launch canister, and, as necessary,
measure the dimensions of its contents. 

(i) If, by viewing the interior of the launch canister and measuring the dimensions of its contents,
inspectors confirm that the launch canister does not contain an item of inspection, the launch canister
shall not be subject to further inspection. 

(Ii) If, by viewing the interior of the launch canister and measuring the dimensions of its contents,
inspectors are unable to confirm that the contents of the launch canister are not an item of inspection,
inspectors shall have the right to carry out procedures provided for in subparagraph (b) of this
paragraph. 

(b) View the contents of the launch canister, after a member of the in-country escort has removed the
contents from the launch canister: 

(i) If, by viewing the contents of the launch canister, inspectors confirm that the contents of the launch
canister are not an item of inspection, the launch canister shall not be subject to further inspection. 

(Ii) If, by viewing the contents of the launch canister, inspectors are unable to confirm that the contents
of the launch canister are not an item of inspection, inspectors shall have the right to carry out
procedures provided for in paragraph 3 of this Annex. 

8. For a launch canister that is declared to contain a training model of a missile, a member of the
in-country escort shall demonstrate to the satisfaction of inspectors the features that confirm that such a
launch canister contains a training model of a missile. 

9. For a vehicle, a member of the in-country escort shall demonstrate to the satisfaction of inspectors
that the vehicle contains one or more items of inspection of the declared type and, if applicable, variant
or version, or that it does not contain an item of inspection. At the choice of a member of the in-country
escort, inspectors shall have the right to carry out one or more of the following procedures: 

(a) Make measurements of the dimensions of the enclosed space of the vehicle or the dimensions of the
accesses into such a space: 

(i) If, by making such measurements, inspectors confirm that the vehicle, by the dimensions of its
enclosed space or the dimensions of the accesses into such enclosed space is not large enough to
contain, or is not accessible to, an item of inspection, the vehicle shall not be subject to further
inspection. 

(Ii) If, by making such measurements, inspectors confirm that the vehicle, by the dimensions of its
enclosed space and the dimensions of the accesses into such enclosed space, is large enough to contain,
and is accessible to, an item of inspection, inspectors shall have the right to carry out procedures
provided for in subparagraph (c) of this paragraph. 

(b) Make measurements of the dimensions of a partitioned enclosed space within the vehicle or of the
dimensions of the accesses into such a space. 

(i) If, by making such measurements, inspectors confirm that the partitioned enclosed space within the
vehicle, by its dimensions or by the dimensions of the accesses into such a space, is not large enough to
contain, or is not accessible to, an item of inspection, the partitioned enclosed space within the vehicle
shall not be subject to further inspection. 

(Ii) If, by making such measurements, inspectors confirm that the partitioned enclosed space within the
vehicle, by its dimensions and by the dimensions of the accesses into such a space, is large enough to
contain, and is accessible to, an item of inspection, inspectors shall have the right to carry out procedures
provided for in subparagraph (c) of this paragraph. 

(c) View the interior of the vehicle or the partitioned enclosed space within the vehicle, or the open bed
of the vehicle, from a place designated by a member of the in-country escort. This place shall be
designated in such a way as to allow the inspectors to view the entire interior of the vehicle or the
partitioned enclosed space within the vehicle, or the open bed of the vehicle. 

(i) If, by viewing, inspectors confirm that the interior of the vehicle or partitioned enclosed space within
the vehicle, or the open bed of the vehicle does not contain an item of inspection, an unidentified object,
a covered or environmentally protected object, a container, or a launch canister, the vehicle or the
partitioned enclosed space within the vehicle, or the open bed of the vehicle shall not be subject to
further inspection. 

(Ii) If, by viewing, inspectors confirm that the interior of the vehicle or partitioned enclosed space within
the vehicle, or the open bed of the vehicle contains an item of inspection, an unidentified object, a
covered or environmentally protected object, a container or a launch canister, inspectors shall have the
right to carry out the procedures provided for in paragraph 2, 3, 4, 5, 6, 7, or 8 of this Annex. After
inspectors have completed the procedures to confirm the numbers, and, if applicable, types, variants or
versions, of items of inspection or to confirm the absence of an item of inspection, the vehicle and the
items of inspection, containers, launch canisters, or other objects contained therein may leave the
inspection site. 

10. For a structure other than a fixed structure for mobile launchers of ICBMs, a member of the
in-country escort shall demonstrate to the satisfaction of inspectors that the structure contains one or
more items of inspection of the declared type and, if applicable, variant or version, or that it does not
contain an item of inspection. At the choice of a member of the in-country escort, inspectors shall have
the right to carry out one or more of the following procedures: 

(a) Make measurements of the dimensions of the structure or of the dimensions of the accesses into the
structure: 

(i) If, by making such measurements, inspectors confirm that, by its dimensions or by the dimensions of
the accesses into the structure, the structure is not large enough to contain, or is not accessible to, an
item of inspection, the structure shall not be subject to further inspection. 

(Ii) If, by making such measurements, inspectors confirm that, by its dimensions and by the dimensions
of the accesses into the structure, the structure is large enough to contain, and is accessible to, an item
of inspection, inspectors shall have the right to carry out procedures provided for in subparagraph (c) of
this paragraph. 

b) Make measurements of the dimensions of the partitioned enclosed space within the structure or of
the dimensions of the accesses into such a space: 

(i) If, by making such measurements, inspectors confirm that the partitioned enclosed space within the
structure, by its dimensions or the dimensions of the accesses into such a space, is not large enough to
contain, or is not accessible to, an item of inspection, the partitioned enclosed space within the structure
shall not be subject to further inspection. 

(Ii) If, by making such measurements, inspectors confirm that the partitioned enclosed space within the
structure, by its dimensions and by the dimensions of the accesses into such a space, is large enough to
contain, and is accessible to, an item of inspection, inspectors shall have the right to carry out procedures
provided for in subparagraph (c) of this paragraph. 

(c) View the interior of the structure or the partitioned enclosed space within the structure from a place
designated by a member of the in-country escort. This place shall be designated in such a way as to
allow the inspectors to view the entire interior of the structure or the partitioned enclosed space within
the structure: 

(i) If, by viewing, inspectors confirm that the interior of the structure or the partitioned enclosed space
within the structure does not contain an item of inspection, an unidentified object, a covered or
environmentally protected object, a container, a launch canister,or a vehicle, the structure or the
partitioned enclosed space within the structure shall not be subject to further inspection. 

(Ii) If, by viewing, inspectors confirm that the interior of the structure or the partitioned enclosed space
within the structure contains an item of inspection, an unidentified object, a covered or environmentally
protected object, a container, a launch canister, or a vehicle, inspectors shall have the right to carry out
procedures provided for in paragraph 2, 3, 4, 5, 6, 7, 8, or 9 of this Annex. 

11. For a fixed structure for mobile launchers of ICBMs, a member of the in-country escort shall
demonstrate to the satisfaction of inspectors that the fixed structure contains one or more mobile
launchers of ICBMs of the declared type of ICBM and, if applicable, version of a mobile launcher of
ICBMs of the declared type of ICBM and no other item of inspection or that it does not contain an item
of inspection. Inspectors shall have the right: 

(a) To make measurements of the dimensions of all fixed structures for road-mobile launchers of
ICBMs to confirm that such fixed structures in a restricted area cannot contain more than the number
of road-mobile launchers of ICBMs specified for that restricted area; 

(b) To make measurements of the dimensions of all fixed structures for rail-mobile launchers of ICBMs
to confirm the specified dimensions of such fixed structures; 

(c) To view the interior of each fixed structure from a place designated by a member of the in-country
escort. This place shall be designated in such a way as to allow the inspectors to view the entire interior
of the fixed structure for mobile launchers of ICBMs: 

(i) If, by viewing, inspectors confirm that the interior of the fixed structure does not contain an item of
inspection, an unidentified object, a covered or environmentally protected object, a container, a launch
canister, or a vehicle, the fixed structure shall not be subject to further inspection. 

(Ii) If, by viewing, inspectors confirm that the interior of the fixed structure contains an item of
inspection, an unidentified object, a covered or environmentally protected object, a container, a launch
canister, or a vehicle, inspectors shall have the right to carry out procedures provided for in paragraph 2,
3, 4, 5, 6, 7, 8, or 9 of this Annex. 

(d) To read the data from the unique identifiers applied to ICBMs for mobile launchers of ICBMs as
provided for in paragraph 5 of Annex 6 to this Protocol. When carrying out procedures provided for in
this paragraph, no more than a total of four inspectors shall be allowed inside a fixed structure for mobile
launchers of ICBMs if such a fixed structure for mobile launchers of ICBMs. 

ANNEX 2 

PROCEDURES FOR INSPECTION OF SILO LAUNCHERS OF ICBMs, MOBILE
LAUNCHERS OF ICBMs, AND SLBM LAUNCHERS 

1. For an inspection of a silo launcher of ICBMs declared not to contain an ICBM, upon arrival of the
inspection team subgroup at such a silo launcher of ICBMs, the inspection team subgroup shall have the
right to ascertain that it is the designated silo launcher of ICBMs by comparing its geographic
coordinates, determined using a satellite system receiver and the procedures provided for in Annex 8 to
this Protocol, with the geographic coordinates specified for that silo launcher. After confirmation of
coordinates, the inspected Party shall open the silo door. The inspectors shall have the right to view the
interior of this ICBM launcher from a place designated by a member of the in-country escort, to confirm
that it does not contain an ICBM or a first stage of an ICBM. 

2. For an inspection of a road-mobile launcher of ICBMs declared not to contain an ICBM, if inspectors
are unable to confirm by means of external viewing of the launcher that it does not contain an ICBM,
inspectors shall have the right to view the interior of that road-mobile launcher of ICBMs through a
maintenance hatch. 

3. For an inspection of a rail-mobile launcher of ICBMs declared not to contain an ICBM, inspectors
shall have the right to view the interior of the railcar of such a launcher through a maintenance hatch or
from the entry compartment of that railcar to confirm that it does not contain an ICBM. 

4. For an inspection of an SLBM launcher declared not to contain an SLBM, upon arrival of the
inspection team subgroup at such an SLBM launcher, the inspected Party shall open the SLBM
launcher hatch. Inspectors shall have the right to view the interior of the SLBM launcher, from a place
designated by a member of the in-country escort, to confirm that it does not contain an SLBM or the
first stage of an SLBM. 

5. For baseline data inspections, data update inspections, and new facility inspections, after the viewing
in accordance with paragraph 1 of this Annex has been completed, the inspection team subgroup shall
return to the maintenance facility of the inspected ICBM base for silo launchers of ICBMs or, for a
reentry vehicle inspection after the viewing in accordance with paragraph 1, 2, 3, or 4 of this Annex has
been completed, the inspection team subgroup shall have the right, at its choice, to rejoin the inspection
team or to go to the designated location where post-inspection procedures will be carried out. 

ANNEX 3 

PROCEDURES FOR REENTRY VEHICLE INSPECTIONS CONDUCTED PURSUANT TO
PARAGRAPH 6 OF ARTICLE XI OF THE TREATY 

1. The inspected Party shall have the right to prepare the front section for viewing in the launcher of
ICBMs or SLBMs, in close proximity to it, in a vehicle, or at a specially allocated site determined by the
inspected Party. 

2. For silo launchers of ICBMs and SLBM launchers: 

(a) Upon arrival of the inspection team at a designated silo launcher of ICBMs containing the ICBM to
be inspected, inspectors shall have the right to confirm, in accordance with the procedures provided for
in paragraph 1 of Annex 2 to this Protocol, that it is the silo launcher of ICBMs designated by the
inspection team leader. 

(b) Upon arrival of inspectors at the silo launcher of ICBMs or SLBM launcher containing the ICBM or
SLBM to be inspected, a member of the in-country escort escort shall designate one or more places
where the inspectors may be present. This place or these places shall be determined in a manner
permitting inspectors to observe the upper silo or tube edge of such an ICBM or SLBM launcher and
permitting inspectors to see any vehicles, containers, or objects that enter or leave the vicinity of the
ICBM or SLBM launcher. The boundaries of that vicinity shall be determined by a member of the
in-country escort. The place or places from which inspectors may observe the upper silo or tube edge of
the ICBM or SLBM launcher shall be located no more than 50 meters from that launcher. In cases
where a clear and unobstructed view cannot be achieved within a 50-meter distance, the inspection
team leader and a member of the in-country escort may agree to a position or positions that permit a
clear and unobstructed view of the upper edge of the launcher from a distance greater than 50 meters. 

(c) Upon the arrival of inspectors at the designated silo launcher of ICBMs or SLBM launcher, if
requested by the inspection team leader, a member of the in-country escort shall provide the inspectors
the opportunity to familiarize themselves with the vicinity of this launcher in such a manner that
inspectors may orient themselves and have an understanding of the relative positions of the launcher and
such structures or vehicles as may be located in its vicinity. 

(d) Inspectors shall have the right to maintain continuous visual observation of the upper silo or tube
edge of such an ICBM or SLBM launcher or of vehicles, devices, or temporary structures used for the
removal of the missile or the front section from the launcher or for the preparation of the front section
for viewing. The purpose of such observation shall be to ascertain that no reentry vehicle is removed
from the ICBM or SLBM launcher during the time period beginning with the opening of the ICBM silo
launcher door or SLBM launcher hatch and ending with the completion of preparation of the front
section for viewing or the removal of the missile or front section from the ICBM or SLBM launcher,
whichever is earlier. 

(e) Prior to the time of the opening of the ICBM silo launcher door or SLBM launcher hatch, a member
of the in-country escort shall inform the inspection team leader of the opening. Inspectors shall have the
right to observe the opening of the ICBM silo launcher door or SLBM launcher hatch; the time of the
opening shall be at the discretion of the inspected Party. 

(f) A member of the in-country escort shall demonstrate to the satisfaction of inspectors that any
vehicles, containers, or objects that enter or leave the vicinity of the ICBM or SLBM launcher during
the time period beginning with the opening of the ICBM silo launcher door or SLBM launcher hatch and
ending with the completion of the preparation of the front section for viewing or the removal of the
missile or front section from the ICBM or SLBM launcher, whichever is earlier, do not contain reentry
vehicles. 

3. As required, at the choice of the inspected Party, a mobile launcher of ICBMs that contains an ICBM
to be inspected may proceed to a specially allocated site where the viewing of the front section of such
an ICBM will be carried out, or where the front section will be separated from the ICBM. In that case,
the inspection team shall have the right to maintain uninterrupted visual contact with the mobile launcher
of ICBMs. 

4. As required, at the choice of the inspected Party, a submarine whose launcher contains an SLBM to
be inspected, may proceed to a specially allocated site where the viewing of the front section of such an
SLBM will be carried out, or where the SLBM will be removed from its launcher, or the front section
will be separated from the SLBM. In that case, the submarine shall proceed on the surface to that site,
and the inspection team shall have the right to maintain uninterrupted visual contact with that ballistic
missile submarine. 

5. The inspected Party shall not remove any reentry vehicles from the front section of the ICBM or
SLBM to be inspected throughout the entire period of time between the time it is designated for
inspection and the completion of the viewing of the front section. 

6. If the front section is viewed directly in the ICBM or SLBM launcher, the inspected Party shall
prepare the front section for viewing subject to the provisions of paragraph 8 or 11 of this Section and
shall give the inspection team an opportunity to view it. Preparation of the front section for viewing may
include its partial separation from the missile. Inspectors shall have the right to view the interior of the
vehicles and devices used to prepare the front section for viewing, prior to their use and after the
completion of viewing of the front section. This viewing shall be carried out to confirm that such
vehicles or devices do not contain another front section or other reentry vehicles. For SLBMs, if the
inspected Party places over an SLBM launcher a temporary structure specially intended for preparing
the front section for viewing and for viewing it, inspectors shall have the right to inspect that temporary
structure before it is put in place and after the viewing of the front section is completed. This viewing
shall be carried out to confirm that the temporary structure does not contain another front section or
other reentry vehicles. 

7. For viewing of the front section carried out outside an ICBM or SLBM launcher: 

(a) The inspectors shall have the right to view the interior of the vehicles and devices used to remove a
missile or front section from an ICBM or SLBM launcher, prior to their use. This viewing shall be
carried out to ascertain that such vehicles or devices do not contain another missile, front section, or
other reentry vehicles After the removal of the missile or front section from a vehicle or device,
inspectors shall have the right to view it again to ascertain that it contains no reentry vehicles. 

(b) The inspected Party shall separate the front section and remove it from the ICBM or SLBM
launcher or remove the missile with its front section from the ICBM or SLBM launcher. 

(c) If the inspected Party separates the front section in the ICBM or SLBM launcher and then removes
it, no more than two inspectors shall have the right to view the interior of the launcher for no more than
one minute from a place designated by a member of the in-country escort, to confirm that the front
section is completely separated. A member of the in-country escort shall designate this place in such a
way as to provide an unobstructed view of the interior of the ICBM or SLBM launcher. 

(d) If, in the process of preparing for the demonstration, the front section or missile with its front section
is placed into a vehicle, inspectors shall have the right to view the interior of the vehicle before the
missile or front section is placed in it, in order to ascertain that it does not contain another missile, front
section, or other reentry vehicles. 

(e) If the front section is viewed at a specially allocated site, inspectors shall have the right to follow that
vehicle during the transportation of the missile with its front section or of the front section in the vehicle
to that site in such a way as to maintain uninterrupted visual contact with the vehicle; after the missile
with its front section or the front section has been unloaded from that vehicle, inspectors shall have the
right to view the vehicle again to ascertain the absence therein of reentry vehicles. 

8. Preparation of the front section for viewing shall include full or partial removal of the shroud except
for missiles that do not utilize a shroud. The process of preparation of the front section for viewing may
be carried out outside the field of view of inspectors in such a way as to permit inspectors to ascertain
that no reentry vehicles are removed from the front section. 

9. If the front section is viewed in the vehicle, inspectors shall have the right to observe the vehicle
throughout the entire period of time between the placement of the front section in the vehicle and the
viewing of the front section. 

10. If the front section is viewed at a specially allocated site, the following procedures shall apply: 

(a) Before the shroud is removed inspectors shall have the right to view the specially allocated site
inside a room or within a portion of the site for viewing the front section, to ascertain that the site does
not contain another front section or other reentry vehicles. 

(b) During the entire process of preparation of the front section for viewing, inspectors shall have the
right, at their own choice, either to observe all exits of the site to ascertain that no reentry vehicles are
removed from that site, or to seal all the exits with seals. During the process of preparation of the front
section for viewing, no vehicle, container, launch canister, or object shall leave the site until inspected or
until an inspector declares that he or she does not intend to inspect it. 

11. Before the front section is viewed, the inspected Party may cover reentry vehicles and other
equipment, including the mounting platform, with covers, in such a manner that the covers shall not
hamper inspectors in ascertaining that the front section contains no more reentry vehicles than the
number of warheads attributed to missiles of that type. Inspectors shall have the right to view the covers
and to measure hard covers prior to their placement on the reentry vehicles. 

12. After the process of preparation of the front section for viewing has been completed, inspectors may
view the front section continuously for no more than 15 minutes from a place or places designated by a
member of the in-country escort no more than five meters from the front section and providing a clear,
unobstructed view of the front section, to ascertain that the front section contains no more reentry
vehicles than the number of warheads attributed to missiles of that type. 

13. If a member of the in-country escort declares that an object contained in the front section is not a
reentry vehicle, the inspected Party shall demonstrate to the satisfaction of the inspectors that this object
is not a reentry vehicle. 

14. If the preparation of the front section for viewing has been carried out outside the field of view of
inspectors, the inspectors, upon completion of viewing of the front section and prior to the reinstallation
of the shroud, may view the vehicle or specially allocated site where the front section was viewed,
including the space under the shroud, to ascertain the absence of reentry vehicles outside the front
section. 

15. The in-country escort shall provide in the vicinity of the ICBM or SLBM launcher and at the site
where the viewing of the front section will be carried out, lighting sufficient for the conduct of the
procedures provided for in this Annex. 

16. The inspected Party shall transport the inspection team to the location designated by the inspected
Party for carrying out post-inspection procedures. 

ANNEX 4

PROCEDURES FOR INSPECTIONS OF HEAVY BOMBERS, FORMER HEAVY
BOMBERS, LONG-RANGE ALCMs, AND THEIR FACILITIES 

I. For inspections of heavy bombers, former heavy bombers, and long-range nuclear ALCMs
conducted during distinguishability exhibitions, and for inspections of long-range non-nuclear
ALCMs conducted during exhibitions conducted pursuant to notifications provided in
accordance with Section VII of the Notification Protocol: 

1. Inspectors shall have the right to view a heavy bomber to confirm the presence of features, specified
for the type, category, and, if applicable, variant of such heavy bomber, that make the heavy bomber
distinguishable from heavy bombers of other categories of the same type, pursuant to subparagraph 9(e)
of Article III of the Treaty. Inspectors shall have the right to make linear measurements, pursuant to
paragraph 19 of Section VI of this Protocol, to confirm that the technical data and distinguishing features
correspond to the values specified in Annex G to the Memorandum of Understanding, for the type,
category, and, if applicable, variant of such heavy bomber, as well as to the values specified in Annex H
to the Memorandum of Understanding, to the extent that such data is required to confirm the
distinguishing features of such heavy bomber. Inspectors shall not have the right to inspect areas of the
interior of a heavy bomber that are not related to specified technical data or distinguishing features. 

2. Inspectors shall have the right to view a former heavy bomber to confirm the presence of features,
specified for the type of such former heavy bomber, that make it distinguishable from heavy bombers of
the same type pursuant to subparagraph 9(e) of Article III of the Treaty. Inspectors shall have the right
to make linear measurements to confirm that the distinguishing features correspond to the values
specified in Annex G to the Memorandum of Understanding for the type of such former heavy bomber,
pursuant to paragraph 19 of Section VI of this Protocol. Inspectors shall not have the right to inspect
areas of the interior of a former heavy bomber that are not related to specified distinguishing features. 

3. Inspectors shall have the right to view a long-range nuclear ALCM and to make linear measurements
to confirm that the technical data correspond to the values specified in Annex H to the Memorandum of
Understanding for the type and, if applicable, variant of such long-range nuclear ALCM, pursuant to
paragraph 19 of Section VI of this Protocol. 

4. Inspectors shall have the right to view a long-range non-nuclear ALCMs, to use radiation detection
equipment to confirm that the ALCM is non-nuclear, and to make linear measurements to confirm the
presence of features, which have been specified in the notification provided in accordance with Section
VII of the Notification Protocol, that make such a long-range non-nuclear ALCM distinguishable from
long-range nuclear ALCMs, pursuant to subparagraph 9(f) of Article III of the Treaty. For long-range
non-nuclear ALCMs stored in containers, prior to the commencement of such procedures, the
inspectors shall have the right to make linear measurements of the dimensions of the container, and the
in-country escort shall open the container and remove the missile. Inspectors shall not have the right to
observe removal of the missile from the container, but removal shall be accomplished so as to provide
confidence that the missile and container are the same ones originally exhibited. The radiation detection
equipment and a radiation source may also be used to confirm that the container does not conceal the
presence of radiation. 

5. A member of the in-country escort shall designate locations on an inspected item where linear
measurements may be made. The inspected Party may cover the item to be inspected provided that
such covering does not preclude confirmation by viewing or linear measurement of specified
distinguishing features and technical data, as applicable, of the inspected item. The inspected Party shall
ensure sufficient lighting to facilitate inspection. Photographs may be taken to document features of the
exhibited items subject to procedures provided for in paragraph 10 of Section XV of this Protocol. 

6. Inspectors shall use radiation detection equipment in accordance with the procedures provided for in
Section VI of Annex 8 to this Protocol. 

II. For inspections of heavy bombers and former heavy bombers during baseline data
inspections, data update inspections, new facility inspections, and baseline exhibitions: 

1. Inspectors shall have the right to confirm, as provided for in paragraph 14 of Section VII of this
Protocol, heavy bomber equipage and that a heavy bomber equipped for non-nuclear armaments, a
training heavy bomber, or a former heavy bomber satisfies the requirements for conversion in
accordance with Section VI of the Conversion or Elimination Protocol. 

2. Inspectors shall also have the right to view a heavy bomber or former heavy bomber to confirm the
presence of features, specified for the type and, if applicable, the category and variant of such airplane,
that make the heavy bomber distinguishable from other heavy bombers of the same type, or that make
the former heavy bomber distinguishable from heavy bombers of the same type, pursuant to
subparagraph 9(e) of Article III of the Treaty. Inspectors shall have the right to make those linear
measurements that can be made without changing the configuration of the heavy bomber or former
heavy bomber by adding or removing equipment, to confirm that the number of long-range nuclear
ALCMs for which the heavy bomber is equipped or the distinguishing features correspond to the values
specified in Annex G to the Memorandum of Understanding for the type and, if applicable, the category
and variant of such airplane, pursuant to paragraph 19 of Section VI of this Protocol. During each
inspection of a facility, however, at the request of the inspection team leader, the in-country escort shall
remove one pylon from one non-alert heavy bomber equipped for nuclear armaments other than
long-range nuclear ALCMs, of a type specified not to carry long-range nuclear ALCMs on external
attachment joints, or one pylon from one heavy bomber equipped for non-nuclear armaments. The
particular heavy bomber and the particular pylon shall be designated by the inspection team leader.
Inspectors shall not have the right to inspect areas of the interior of a heavy bomber or former heavy
bomber that are not related to specified distinguishing features. 

3. The inspection team leader shall designate prior to the completion of pre-inspection procedures which
of the heavy bombers subject to inspection and former heavy bombers located at the facility at the time
pre-inspection restrictions went into effect are to be inspected. For a heavy bomber or former heavy
bomber that arrives at the facility during the period of inspection and that is subject to inspection, the
inspection team leader shall, immediately upon the arrival of the heavy bomber or former heavy bomber,
inform the in-country escort whether it is designated to be inspected. During the period of inspection, no
heavy bomber or former heavy bomber designated for inspection shall depart the facility until inspected. 

4. A member of the in-country escort shall designate locations on an inspected item where linear
measurements may be made. The inspected Party may cover the item to be inspected provided that
such covering does not preclude confirmation by viewing or linear measurement of specified
distinguishing features and technical data, as applicable, of the inspected item. The inspected Party shall
ensure sufficient lighting to facilitate inspection. 

III. For inspections of alert heavy bombers conducted pursuant to subparagraph 14(d) of
Section VII of this Protocol: 

1. The procedures provided for in this Section shall apply to heavy bombers designated as alert heavy
bombers during inspections of air bases for heavy bombers equipped for long-range nuclear ALCMs
and air bases for heavy bombers equipped for nuclear armaments other than long-range nuclear
ALCMs. 

2. At air bases referred to in paragraph 1 of this Section, prior to the completion of pre-inspection
procedures, a member of the in-country escort shall inform the inspection team leader of the location of
alert heavy bombers. The in-country escort shall have the right to prepare such heavy bombers for
inspection at a location chosen by the inspected Party that shall permit inspectors to view the
preparation. Preparation may involve the use of covering, provided that such covering allows the
inspectors to confirm the data provided for in subparagraph 14(a)(i) or 14(a)(ii) of Section VII of this
Protocol. The areas where alert heavy bombers are located shall not be subject to inspection except as
provided for in this Section. 

3. No more than a total of four inspectors shall inspect an alert heavy bomber for a total period of no
more than 30 minutes. Measurements shall not be taken during such an inspection, except that closed
weapons bay doors may be measured. For heavy bombers of a category, type, and, if applicable, variant,
the internal weapons bays of which are specified to be large enough to contain a long-range nuclear
ALCMs, the weapons bay doors shall be opened, and inspectors may view the contents of the bay from
a position external to the bay, designated by a member of the in-country escort, from which inspectors
can accomplish the purpose provided for in subparagraph 14(a)(i) or 14(a)(ii) of Section VII of this
Protocol. 

IV. For inspections of weapons storage areas conducted pursuant to subparagraph 14(f) of
Section VII of this Protocol: 

1. The procedures provided for in this Section shall apply to air bases for heavy bombers equipped for
nuclear armaments other than long-range nuclear ALCMs, air bases for heavy bombers equipped for
non-nuclear armaments, air bases for former heavy bombers, and training facilities for heavy bombers. 

2. A member of the in-country escort shall, prior to the completion of pre-inspection procedures at a
facility referred to in paragraph 1 of this Section, inform the inspection team leader of the location of
weapons storage areas, and shall provide a site diagram of such areas depicting the structures that are
large enough to contain the smallest long-range nuclear ALCM. 

3. Inspections of covered or environmentally protected objects, containers, vehicles, and structures that
are located within the boundaries of weapons storage areas shall be carried out in accordance with the
procedures provided for in Annex 1 to this Protocol, except that inspections of containers that are large
enough to contain the smallest long-range nuclear ALCM, of a type for which data according to
categories of data contained in Annex H to the Memorandum of Understanding have been specified,
shall be carried out in accordance with the procedures provided for in paragraphs 4, 5, 6, and 7 of this
Section. Additionally, except as provided for in paragraph 4 or 5 of this Section, the inspectors may, in
carrying out the procedures provided for in Annex 1 to this Protocol, make linear measurements only of
covered or environmentally protected objects, containers, vehicles, and structures. No more than a total
of four inspectors shall be allowed in a structure. 

4. During the inspection of weapons storage areas at each facility, the inspectors may designate for
further inspection no more than three containers that are large enough to contain the smallest long-range
nuclear ALCM; or no more than three ALCMs stored outside containers; or any combination of no
more than three such items: 

(a) Inspectors shall have the right to confirm that such a designated container does not contain a
long-range nuclear ALCM, subject to the following procedures: 

(i) Inspectors shall have the right to make additional linear measurements of the dimensions of such a
container, and to use radiation detection equipment on the exterior of the container. 

(Ii) For containers inside which is a source of radiation that is detected by using radiation detection
equipment, the in-country escort shall open the container so that inspectors can confirm by means of
viewing its interior that the container does not contain a long-range nuclear ALCM. 

(Iii) If, by viewing the contents of the container, inspectors confirm that the contents are not a
long-range nuclear ALCM, then the container and its contents shall not be subject to further inspection. 

(iv) If, by viewing the contents of the container, inspectors are unable to confirm that the contents are
not a long-range nuclear ALCM, the in-country escort shall remove the contents from the container.
Inspectors shall not have the right to observe the removal of the contents of the container, but removal
shall be accomplished so as to provide confidence that the contents and the container are the items
chosen by the inspectors. The inspectors shall have the right to view the contents of the container and to
make linear measurements to confirm the presence of features that make the contents of the container
distinguishable from long-range nuclear ALCMs. 

(v) If, by such viewing and making such measurements, inspectors are unable to confirm that the
contents are not a long-range nuclear ALCM, they shall record their findings in the inspection report. A
member of the in-country escort shall, at the request of the inspectors, photograph the contents of the
container subject to the procedures provided for in paragraph 27 of Section VI of this Protocol. 

(b) Inspectors shall have the right to confirm that a designated ALCM stored outside a container is not a
long-range nuclear ALCM, subject to the following procedures: 

(i) Inspectors shall have the right to view such an ALCM to confirm the presence of the features that
make the ALCM distinguishable from long-range nuclear ALCMs. 

(Ii) If, by viewing such an ALCM, inspectors confirm that the ALCM is not a long-range nuclear
ALCM, the ALCM shall not be subject to further inspection. 

(Iii) If, by viewing such an ALCM, inspectors are unable to confirm that the ALCM is not a long-range
nuclear ALCM, a member of the in-country escort may allow the inspectors to carry out additional
actions, which may include making linear measurements and using radiation detection equipment, to
confirm the presence of features that make the ALCM distinguishable from long-range nuclear
ALCMs. 

(Iv) If a member of the in-country escort does not allow such additional actions, or if, by carrying out
such additional actions, inspectors are unable to confirm that the ALCM is not a long-range nuclear
ALCM, the inspectors shall record their findings in the inspection report. A member of the in-country
escort shall, at the request of the inspectors, photograph the ALCM subject to the procedures provided
for in paragraph 27 of Section VI of this Protocol. 

5. For containers that are declared by a member of the in-country escort to be of types of containers
exhibited pursuant to Section VII of the Notification Protocol as containers of long-range non-nuclear
ALCMs, and that are large enough to contain the smallest long-range nuclear ALCM, the inspectors
shall also have the right to designate for inspection a total of no more than three such containers during
each three-year period in order to confirm that a long-range nuclear ALCM is not contained therein,
subject to the following procedures: 

(a) The in-country escort shall open the container so that inspectors can confirm by means of viewing its
interior that the container does not contain a long-range nuclear ALCM. 

(b) If, by viewing the contents of the container, inspectors confirm that the contents are not a long-range
nuclear ALCM, then the container and its contents shall not be subject to further inspection. 

(c) If, by viewing the contents of the container, inspectors are unable to confirm that the contents are
not a long-range nuclear ALCM, the in-country escort shall remove the contents from the container.
Inspectors shall have the right to use radiation detection equipment to confirm that the contents are
non-nuclear, and to make linear measurements to confirm the presence of features, notification of which
has been provided in accordance with Section VII of the Notification Protocol, that make the contents
of the container distinguishable from long-range nuclear ALCMs. Inspectors shall not have the right to
observe removal of the contents from the container, but removal shall be accomplished so as to provide
confidence that the contents and container are the same ones originally designated by the inspectors.
The radiation detection equipment and a radiation source may also be used to confirm that the container
does not conceal the presence of radiation. 

(d) If, by making such measurements, inspectors are unable to confirm that the contents of the
container are not a long-range nuclear ALCM, or that such a container does not conceal the
presence of radiation, they shall record their findings in the inspection report. A member of the
in-country escort shall, at the request of the inspectors, photograph the contents of the container
or the container, in accordance with the procedures provided for in paragraph 27 of Section VI
of this Protocol. (JCIC Agreement No. 24, Article III) 

6. A member of the in-country escort shall designate locations on an inspected object where linear
measurements may be made. The inspected Party may cover the object to be inspected provided that
such covering does not preclude confirmation by viewing or linear measurement of specified
distinguishing features and technical data, as applicable. The inspected Party shall ensure sufficient
lighting to facilitate inspection. 

7. Inspectors shall use radiation detection equipment in accordance with the procedures provided for in
Section VI of Annex 8 to this Protocol. 

V. Procedures for exhibitions of heavy bombers, former heavy bombers, and long-range
ALCMs: 

1. During distinguishability exhibitions for heavy bombers, former heavy bombers, and long-range
nuclear ALCMs: 

(a) For an exhibition conducted subject to the provisions of paragraph 1 of Section XV of this Protocol,
the inspected Party shall exhibit, for a type of heavy bomber from any one of which a long-range
nuclear ALCMs has been flight-tested, one heavy bomber of each category and, if applicable, variant of
that type in close proximity to one another. In addition, the inspected Party shall exhibit, in close
proximity to such heavy bombers, one long-range nuclear ALCM of each type and, if applicable, variant.
Different types of heavy bombers from any one of which a long-range nuclear ALCM has been
flight-tested may be exhibited at separate sites. 

(b) For subsequent exhibitions conducted subject to the provisions of paragraph 3 of Section XV of this
Protocol: 

(i) If notification has been provided in accordance with paragraph 8 of Section VII of the Notification
Protocol , the inspected Party shall, at a minimum, exhibit one heavy bomber of the new type, new
category of a type, or new variant of a category and type. 

(Ii) If notification has been provided in accordance with paragraph 10 of Section VII of the Notification
Protocol, the inspected Party shall, at a minimum, exhibit, in close proximity to one another, one heavy
bomber of the type specified in such notification equipped for long-range nuclear ALCMs, and one
heavy bomber of each variant of the same type of heavy bomber equipped for nuclear armaments other
than long-range nuclear ALCMs. 

(Iii) If notification has been provided in accordance with paragraph 11 of Section VII of the Notification
Protocol, the inspected Party shall, at a minimum, exhibit one long-range nuclear ALCMs of the new
type specified in such notification. 

2. During pre-inspection procedures for distinguishability exhibitions: 

(a) A member of the in-country escort shall identify for inspectors each type, category, and, if
applicable, variant of heavy bomber that is to be exhibited, and each type and, if applicable, variant of
long-range nuclear ALCMs that is to be exhibited. 

(b) A member of the in-country escort shall inform inspectors of, and point out in photographs or slides
and in drawings, for each type of heavy bomber and former heavy bomber to be exhibited, the
differences that make heavy bombers of each category and, if applicable, variant distinguishable from
heavy bombers of other categories and variants of that type and from a former heavy bomber of that
type. A member of the in-country escort shall provide to the inspection team leader photographs
demonstrating such distinguishing features. 

(c) A member of the in-country escort shall inform inspectors of, and point out in photographs or slides
and in drawings, for each type of long-range nuclear ALCM to be exhibited for which there are
variants, the differences that make each variant of long-range nuclear ALCM of that type
distinguishable from other variants of that type. A member of the in-country escort shall provide to the
inspection team leader photographs demonstrating such distinguishing features. A member of the
in-country escort shall also point out all the positions for long-range nuclear ALCMs on heavy bombers,
of each type and variant, equipped for long-range nuclear ALCMs, and inform inspectors of the
maximum number of long-range nuclear ALCMs for which a heavy bomber of each type and, if
applicable, each variant is equipped. 

3. For exhibitions of long-range non-nuclear ALCMs conducted pursuant to notifications provided in
accordance with Section VII of the Notification Protocol, a member of the in-country escort shall inform
inspectors of, and point out in photographs or slides and in drawings, the differences that make
long-range non-nuclear ALCMs of the type exhibited distinguishable from long-range nuclear ALCMs
of each type. A member of the in-country escort shall provide to the inspection team leader photographs
demonstrating such distinguishing features. 

4. During baseline exhibitions for heavy bombers and former heavy bombers conducted pursuant to
paragraph 13 of Article XI of the Treaty, the inspected Party shall exhibit, at one or more exhibition
sites, all heavy bombers equipped for non-nuclear armaments, all former heavy bombers, and all training
heavy bombers specified in the notification provided in accordance with paragraph 1 of Section I of the
Notification Protocol. 

5. During pre-inspection procedures for baseline exhibitions: 

(a) A member of the in-country escort shall inform inspectors of the numbers of heavy bombers, of
each type, equipped for nuclear armaments other than long-range nuclear ALCMs; of heavy bombers,
of each type, equipped for non-nuclear armaments; of former heavy bombers of each type; and of
training heavy bombers of each type that are to be exhibited. 

(b) For exhibitions of heavy bombers equipped for non-nuclear armaments, a member of the in-country
escort shall inform inspectors of, and point out in photographs or slides and in drawings, the
distinguishing features that have been given to such heavy bombers during modification pursuant to
paragraph 11 of Section VI of the Conversion or Elimination Protocol. 

(c) For exhibitions of former heavy bombers and training heavy bombers, a member of the in-country
escort shall inform the inspectors of, and point out in photographs or slides and in drawings, the
distinguishing features that have been given to such airplanes during modification pursuant to paragraphs
11 and 12 of Section VI of the Conversion or Elimination Protocol, or the recognition features of
specified former heavy bombers. 

(d) For exhibitions of heavy bombers equipped for nuclear armaments other than long-range nuclear
ALCMs, a member of the in-country escort shall inform inspectors of, and point out in photographs or
slides and in drawings, the features that make such heavy bombers distinguishable from heavy bombers,
of the same type, equipped for long-range nuclear ALCMs. 

ANNEX 5 

PROCEDURES FOR CONTINUOUS MONITORING 

1. Monitors shall have the right to confirm the numbers, types, and, if applicable, variants of types of
items of continuous monitoring that are declared to exit from the monitored facility, and to confirm that
no other items of continuous monitoring exit from the monitored facility. For this purpose, in carrying out
the procedures for continuous monitoring provided for in this Annex, the size criteria as defined in
paragraph 24 of Section VI of this Protocol shall be used. 

2. If any covered or environmentally protected object, container, launch canister, or other object or
vehicle exiting from the monitored facility through the portal is large enough to contain or to be an item
of continuous monitoring, a member of the in-country escort shall so declare to monitors no less than 30
minutes prior to the arrival of the covered or environmentally protected object, container, launch
canister, or other object or vehicle at the portal. The declaration shall state whether or not such an
object is an item of continuous monitoring, or whether or not such an object, container, launch canister,
or vehicle contains an item of continuous monitoring and the estimated time of its arrival at the portal. If
such an object is an item of continuous monitoring or if a container, launch canister, or vehicle contains
an item of continuous monitoring, a member of the in-country escort shall specify in writing the numbers,
types, and, if applicable, variant of types of items of continuous monitoring. More than one item of
continuous monitoring may be transported in a vehicle, but only one item of continuous monitoring may
be transported in each container or in each launch canister. 

3. Monitors shall have the right to read the data from the unique identifier on each launch canister
declared to contain an ICBM for mobile launchers of ICBMs if such ICBMs are maintained, stored, and
transported in launch canisters, or on each first stage of an ICBM for mobile launchers of ICBMs if
such ICBMs are maintained, stored, and transported as assembled missiles without launch canisters or
in stages. 

4. For a vehicle that is exiting from the monitored facility and that is declared to contain an item of
continuous monitoring, a member of the in-country escort shall demonstrate to the satisfaction of
monitors that the vehicle contains one or more items of continuous monitoring, of the number, type, and,
if applicable, variant of the type declared. For this purpose, monitors shall have the right to view the
interior of such a vehicle or the open bed of the vehicle. If, by viewing, monitors confirm that the interior
of the vehicle or the open bed of the vehicle contains a covered or environmentally protected object,
container, launch canister, or an item of continuous monitoring that is outside a container or launch
canister and that is not covered or environmentally protected, monitors shall have the right to carry out
procedures provided for in paragraph 5, 6, 7, or 8 of this Annex. If inside such a vehicle there is a
partitioned enclosed space that is declared by a member of the in-country escort not to contain an item
of continuous monitoring, monitors shall have the right to carry out procedures provided for in
subparagraph 9(b) of this Annex. After completion of those procedures, the vehicle may leave the
monitored facility. 

5. For a covered or environmentally protected object exiting from the monitored facility that is declared
to be an item of continuous monitoring, a member of the in-country escort shall demonstrate to the
satisfaction of monitors that such an object is an item of continuous monitoring of the declared type, and
if applicable, variant of the type. A member of the in-country escort shall partially or, if necessary,
completely remove the cover or environmental protection. If after partial or complete removal of such a
cover or environmental protection, monitors confirm by viewing that the object is an item of continuous
monitoring of the declared type, and if applicable, variant of the type, monitors shall have the right to
carry out procedures provided for in paragraph 8 of this Annex. If after partial or complete removal of
such a cover or environmental protection, monitors confirm by viewing that the object is a container or
launch canister, monitors shall have the right to carry out procedures provided for in paragraph 6 or 7 of
this Annex. 

6. For a container that is exiting from the monitored facility and that is declared to contain an item of
continuous monitoring, a member of the in-country escort shall demonstrate to the satisfaction of
monitors that such a container contains the item of continuous monitoring of the declared type and, if
applicable, variant of the type. Monitors shall have the right to view the interior of such a container. If
by viewing the interior of the container, monitors are unable to confirm the number, type, and, if
applicable, variant of the type of the item of continuous monitoring that is contained therein, a member of
the in-country escort shall remove such an item from the container. In that event, monitors shall have
the right to carry out the procedures provided for in paragraph 8 of this Annex. 

7. For a launch canister exiting from the monitored facility that is declared to contain an item of
continuous monitoring, a member of the in-country escort shall demonstrate to the satisfaction of
monitors that the launch canister is a launch canister for an item of the declared type. Monitors shall
have the right to view such a launch canister and, at locations on the launch canister designated by a
member of the in-country escort, make measurements of the dimensions of the launch canister to
confirm that those dimensions correspond to the dimensions specified for an item of the declared type.
Upon completion of the viewing and measurements, the launch canister shall not be subject to further
inspection. 

8. For an item of continuous monitoring that is exiting from the monitored facility and that is outside a
container or launch canister and that is not covered or environmentally protected, monitors shall have the
right to confirm the type and, if applicable, variant of the type of the declared item of continuous
monitoring by external viewing and by measurement of its dimensions at locations on the item of
continuous monitoring designated by a member of the in-country escort. Upon completion of the viewing
and measurements, the item of continuous monitoring shall not be subject to further inspection. 

9. For a vehicle that is exiting from the monitored facility through the portal and that is not declared to
contain an item of continuous monitoring, a member of the in-country escort shall demonstrate to the
satisfaction of monitors that the vehicle does not contain an item of continuous monitoring. At the choice
of a member of the in-country escort, monitors shall have the right to carry out one or more of the
following procedures: 

(a) Make measurements of the dimensions of the enclosed space of the vehicle or the dimensions of the
accesses into such a space: 

(i) If, by making such measurements, monitors confirm that the vehicle, by the dimensions of the
enclosed space or the dimensions of the accesses into such a space, is not large enough to contain or is
not accessible to an item of continuous monitoring, the vehicle shall not be subject to further inspection. 

(Ii) If, by making such measurements, monitors confirm that the vehicle, by the dimensions of the
enclosed space and the dimensions of the accesses into such a space, is large enough to contain and is
accessible to an item of continuous monitoring, monitors shall have the right to carry out procedures
provided for in subparagraph (c) or (d) of this paragraph. 

(b) Make measurements of the dimensions of a partitioned enclosed space within the vehicle or of the
dimensions of the accesses into such a space: 

(i) If, by making such measurements, monitors confirm that the partitioned enclosed space within the
vehicle, by its dimensions or by the dimensions of the accesses into such a space, is not large enough to
contain or is not accessible to an item of continuous monitoring, the partitioned enclosed space within the
vehicle shall not be subject to further inspection. 

(Ii) If, by making such measurements, monitors confirm that the partitioned enclosed space within the
vehicle, by its dimensions and by the dimensions of the accesses into such a space, is large enough to
contain and is accessible to an item of continuous monitoring, monitors shall have the right to carry out
procedures provided for in subparagraph (c) or (d) of this paragraph. 

(c) Weigh a vehicle with its contents: 

(i) If, by weighing, monitors confirm that the vehicle, by its gross weight, is not heavy enough to contain
an item of continuous monitoring, the vehicle shall not be subject to further inspection. 

(Ii) If, by weighing, monitors confirm that the vehicle, by its gross weight, is heavy enough to contain an
item of continuous monitoring, monitors shall have the right to carry out procedures provided for in
subparagraph (d) of this paragraph. 

(d) View the interior of the vehicle or the partitioned enclosed space within the vehicle, or the open bed
of a vehicle, from a place designated by a member of the in-country escort. This place shall be
designated in such a way as to allow the monitors to view the entire interior of the vehicle or the
partitioned enclosed space within the vehicle, or the open bed of a vehicle: 

(i) If, by viewing, monitors confirm that the interior of the vehicle or partitioned enclosed space within
the vehicle, or the open bed of a vehicle does not contain an item of continuous monitoring, a container,
a launch canister, a covered or environmentally protected object, or an unidentified object, the vehicle or
the partitioned enclosed space within the vehicle, or the open bed of a vehicle shall not be subject to
further inspection. 

(Ii) If, by viewing, monitors confirm that the interior of the vehicle or partitioned enclosed space within
the vehicle, or the open bed of a vehicle contains a container, a launch canister, a covered or
environmentally protected object, or an unidentified object, monitors shall have the right to carry out the
procedures provided for in paragraph 10, 11, 12, or 13 of this Annex. After monitors have completed the
procedures to confirm the numbers, types, and if applicable, variants of types of items of continuous
monitoring or to confirm the absence of an item of continuous monitoring, the vehicle and the containers,
launch canisters, or other objects contained therein may leave the monitored facility. 

10. For a container that is exiting from the monitored facility and that is not declared to contain an item
of continuous monitoring, a member of the in-country escort shall demonstrate to the satisfaction of
monitors that the container does not contain an item of continuous monitoring. At the choice of a
member of the in-country escort, monitors shall have the right to carry out one or more of the following
procedures: 

(a) Make measurements of the dimensions of the container: 

(i) If, by making such measurements monitors confirm that, by its dimensions, the container is not large
enough to contain an item of continuous monitoring, the container shall not be subject to further
inspection. 

(Ii) If, by making such measurements monitors confirm that, by its dimensions, the container is large
enough to contain an item of continuous monitoring, monitors shall have the right to carry out procedures
provided for in subparagraph (b), (c), or (d) of this paragraph. 

(b) View the interior of the container after a member of the in-country escort has opened the container,
and, as necessary, measure the dimensions of its contents: 

(i) If, by viewing the interior of the container and measuring the dimensions of its contents, monitors
confirm that the container does not contain an item of continuous monitoring, the container shall not be
subject to further inspection. 

(Ii) If, by viewing the interior of the container and measuring the dimensions of its contents, monitors are
unable to confirm that the contents of the container are not an item of continuous monitoring, monitors
shall have the right to carry out procedures provided for in subparagraph (c) or (d) of this paragraph. 

(c) View the contents of the container, after a member of the in-country escort has removed the
contents from the container: 

(i) If, by viewing the contents of the container, monitors confirm that the contents of the container are
not an item of continuous monitoring, the container shall not be subject to further inspection. 

(Ii) If, by viewing the contents of the container, monitors are unable to confirm that the contents of the
container are not an item of continuous monitoring, monitors shall have the right to carry out procedures
provided for in paragraph 13 of this Annex. 

(d) Image the contents of the container using non-damaging imaging equipment. If non-damaging
imaging equipment has not been installed, and the inspected Party prefers that the contents of a
container be imaged, the inspected Party shall notify the inspecting Party no less than six months in
advance of the planned exit of such a container, of the planned exit thereof. 

11. For a launch canister that is exiting from the monitored facility and that is declared not to contain an
item of continuous monitoring, a member of the in-country escort shall demonstrate to the satisfaction of
monitors that the launch canister does not contain an item of continuous monitoring. At the choice of a
member of the in-country escort, monitors shall have the right to carry out one or more of the following
procedures: 

(a) View the interior of the launch canister after a member of the in-country escort has opened the
launch canister by removing at least one of the end caps of the launch canister and, as necessary,
measure the dimensions of its contents: 

(i) If, by viewing the interior of the launch canister and measuring the dimensions of its contents,
monitors confirm that the launch canister does not contain an item of continuous monitoring, the launch
canister shall not be subject to further inspection. 

(Ii) If, by viewing the interior of the launch canister and measuring the dimensions of its contents,
monitors are unable to confirm that the contents of the launch canister are not an item of continuous
monitoring, monitors shall have the right to carry out procedures provided for in subparagraph (b) or (c)
of this paragraph. 

(b) View the contents of the launch canister, after a member of the in-country escort has removed the
contents from the launch canister: 

(i) If, by viewing the contents of the launch canister, monitors confirm that the contents of the launch
canister are not an item of continuous monitoring, the launch canister shall not be subject to further
inspection. 

(Ii) If, by viewing the contents of the launch canister, monitors are unable to confirm that the contents of
the launch canister are not an item of continuous monitoring, monitors shall have the right to carry out
procedures provided for in paragraph 13 of this Annex. 

(c) Image the contents of the launch canister using non-damaging imaging equipment. If non-damaging
imaging equipment has not been installed, and the inspected Party prefers that the contents of a launch
canister be imaged, the inspected Party shall notify the inspecting Party, no less than six months in
advance of the planned exit of such a launch canister, of the planned exit thereof. 

12. For a covered or environmentally protected object that is exiting from the monitored facility and that
is not declared to be an item of continuous monitoring, a member of the in-country escort shall
demonstrate to the satisfaction of monitors that the object is not an item of continuous monitoring. At the
choice of a member of the in-country escort, monitors shall have the right to carry out one or more of
the following procedures: 

(a) View the covered or environmentally protected object from a place designated by a member of the
in-country escort after a member of the in-country escort has partially or, if necessary, completely
removed the cover or environmental protection: 

(i) If, by viewing, monitors confirm that the object is not an item of continuous monitoring, a container, or
a launch canister, that object shall not be subject to further inspection. 

(Ii) If, by viewing, monitors are unable to confirm that the object is not an item of continuous monitoring,
monitors shall have the right to carry out procedures provided for in paragraph 13 of this Annex. 

(Iii) If, by viewing, monitors confirm that the object is a container or a launch canister, monitors shall
have the right to carry out the procedures provided for in paragraph 10 or 11 of this Annex. 

(b) Measure the dimensions of the covered or environmentally protected object: 

(i) If, by making such measurements, monitors confirm that the object is not large enough to contain or
to be an item of continuous monitoring, that object shall not be subject to further inspection. 

(Ii) If, by making such measurements, monitors confirm that the object is large enough to contain or to
be an item of continuous monitoring, monitors shall have the right to carry out the procedures provided
for in subparagraph (a) of this paragraph. 

13. For an object that is outside a container or launch canister and that is not covered or environmentally
protected, monitors shall have the right to confirm by external viewing and by making measurements of
its dimensions, at locations on the object designated by a member of the in-country escort, that the object
is not an item of continuous monitoring. 

14. For a vehicle that is exiting from the monitored facility through a road exit, monitors shall have the
right to make measurements of any such vehicle to determine whether it is large enough to contain an
item of continuous monitoring. Those measurements shall be made in such a way as to minimize the
delay of vehicles exiting from the facility. Vehicles large enough to contain an item of continuous
monitoring shall proceed to the portal. Vehicles that are not large enough to contain an item of
continuous monitoring shall not be subject to further inspection and may leave the monitored facility. 

15. At monitored facilities where ICBMs for mobile launchers of ICBMs with multiple independently
targetable reentry vehicles are produced, monitors shall have the right, no more than five times each
year, to inspect containers or vehicles to confirm that no solid rocket motors for the first stages of
ICBMs for mobile launchers of ICBMs, with nozzles attached, exit the monitored facility. In such cases,
the size criteria as defined in paragraph 25 of Section VI of this Protocol shall be used in carrying out
the inspection procedures for containers and vehicles. For the purposes of these inspections, monitors
shall have the right to request a member of the in-country escort to direct a vehicle that is large enough
to contain a solid rocket motor for the first stage of an ICBM for mobile launchers of ICBMs, with a
nozzle attached, to proceed to the portal. Monitors shall have the right to carry out the inspection
procedures provided for in paragraph 9 or 10 of this Annex. 

ANNEX 6 

PROCEDURES RELATING TO UNIQUE IDENTIFIERS 

1. A unique identifier is a non-repeating alpha-numeric production number, or a copy thereof, that has
been applied by the inspected Party, using its own technology, to an ICBM for mobile launchers of
ICBMs, as provided for in paragraph 3 or 4 of this Annex. 

2. Each Party shall provide the other Party with unique identifier data for each ICBM for mobile
launchers of ICBMs in accordance with paragraph 3 or 13 of Section I of the Notification Protocol. 

3. For ICBMs for mobile launchers of ICBMs that are maintained, stored, and transported in launch
canisters, unique identifiers shall be applied: 

(a) for ICBMs existing as of Treaty signature, on each launch canister of such ICBMs for mobile
launchers of ICBMs; 

(b) for ICBMs leaving the production facility after Treaty signature, on each launch canister and on
each first stage of such ICBMs for mobile launchers of ICBMs. The data from such unique identifiers
shall be provided in a form that establishes the "one-to-one" relationship between the data from the
unique identifier applied on the first stage of an ICBM for mobile launchers of ICBMs and the data from
the unique identifier applied on the launch canister associated with such an ICBM. Such unique
identifiers may not be changed. 

4. For ICBMs for mobile launchers of ICBMs that are maintained, stored, and transported as a unit
without launch canisters or in stages, the unique identifiers shall be applied on each first stage of such
ICBMs for mobile launchers of ICBMs. 

5. During baseline data inspections, data update inspections, new facility inspections,
post-dispersal inspections of mobile launchers of ICBMs and their associated missiles, and
conversion or elimination inspections, as well as during the conduct of continuous monitoring,
inspectors or monitors shall have the right to read the data from the unique identifiers on
deployed and non-deployed ICBMs for mobile launchers of ICBMs. Exceptions to the right to
read the data from such unique identifiers are set forth in paragraph 9 of Section VII and
paragraph 11 of Section X of this Protocol . (JCIC Agreement No. 2, article 1, Para 7) The data
from a unique identifier shall be read: 

(a) for ICBMs specified in subparagraph 3(a) of this Annex, from the launch canister associated with
ICBMs for mobile launchers of ICBMs; 

(b) for ICBMs specified in subparagraph 3(b) of this Annex, from the launch canister associated with
ICBMs for mobile launchers of ICBMs, and if the unique identifier applied on the first stage of such a
missile is accessible for external viewing and reading without opening the launch canister, or if during
the process of elimination of such an ICBM the missile is removed from its launch canister, from the
first stage of ICBMs for mobile launchers of ICBMs; 

(c) for ICBMs specified in paragraph 4 of this Annex, from the first stage of such ICBMs for mobile
launchers of ICBMs. 

6. The place from which inspectors or monitors are allowed to read data from the unique identifier
applied on each launch canister for ICBMs for mobile launchers of ICBMs or each first stage of such
an ICBM shall be specified by a member of the in-country escort in such a manner as to ensure an
accurate reading of such data. If a unique identifier applied on a launch canister or a first stage of an
ICBMs for mobile launchers of ICBMs is not accessible for reading as provided for in paragraph 5 of
this Annex, such a unique identifier shall be duplicated on the portion of the surface of the launch
canister or the first stage of an ICBM for mobile launchers of ICBMs that is accessible for reading its
data by inspectors or monitors during viewing. 

7. For a newly-produced ICBMs for mobile launchers of ICBMs, the inspected Party shall inform the
monitors of the data from the unique identifier applied to such an ICBM, as provided for in paragraph 3
or 4 of this Annex, before such an item exits through the portal of the monitored facility and shall
provide to the inspecting Party such data in accordance with paragraph 3 of Section I of the Notification
Protocol. 

ANNEX 7 

PROCEDURES FOR DELIVERING AND EXAMINING EQUIPMENT AND SUPPLIES
TRANSPORTED BY INSPECTION AIRPLANES USED IN ACCORDANCE WITH
PARAGRAPH 4 OF SECTION IV OF THIS PROTOCOL 

1. Prior to the arrival of an inspection airplane used in accordance with paragraph 4 of Section IV of this
Protocol, the inspecting Party, through its embassy, shall provide the inspected Party with an inventory
of cargo being delivered that consists of equipment and supplies intended for the conduct of continuous
monitoring activities. The inspecting Party shall provide this inventory to the inspected Party no
less than ten days prior to the arrival of such an airplane, unless otherwise agreed within the
framework of the Joint Compliance and Inspection Commission. (JCIC Agreement No. 5, Article1)
Such an inventory shall include: 

(a) to which facility subject to continuous monitoring or monitored facility a particular palletized or
oversize item of cargo, including modular structures, shall be delivered; 

(b) the weight and dimensions of each separate palletized or oversize item of cargo, including modular
structures, and, if necessary for facilitating transportation of separate items from the point of entry to a
facility subject to continuous monitoring or monitored facility, black-and-white photographs, or clear
facsimile copies of photographs, of each such item; 

(c) whether there are modular structures in the cargo that is being delivered; 

(d) the contents of each shipping container on a pallet and of each modular structure described in such a
way that the inspected Party is able to correlate each item of equipment that is being delivered with the
list of equipment provided for in Section V of Annex 8 and in Annex 9 to this Protocol; and 

(e) for each major item of equipment specified in that inventory, the part of the perimeter and portal
continuous monitoring system, as specified in Annex 9 to this Protocol, in which that item of equipment
is included. 

2. Each shipping container on a pallet, listed in the inventory provided in accordance with paragraph 1 of
this Annex, shall be marked with a freight marking, and shall have a complete packing list. One copy of
that packing list shall also be included in the inventory. 

3. At the choice of the inspected Party, cargoes consisting of equipment and supplies listed in the
inventory provided in accordance with paragraph 1 of this Annex, may be examined at the point of
entry, at the airport associated with the facility subject to continuous monitoring or monitored facility, or
directly at such a facility. If the examination of such cargo is conducted at the point of entry or at the
airport associated with the facility subject to continuous monitoring or monitored facility, such an
examination, at the discretion of the inspecting Party, may be conducted in the presence of the aircrew
members. Equipment and supplies carried separately from the cargo shall be examined at the point of
entry or at the airport associated with the facility subject to continuous monitoring or monitored facility,
subject to the provisions of paragraphs 8,11, 12 and 13 of Section V of this Protocol. 

4. During the examination of the cargo, the contents of each shipping container, and of each modular
structure, shall be checked against the list of equipment provided for in Section V of Annex 8 and in
Annex 9 to this Protocol and against the inventory of equipment and supplies provided pursuant to
paragraph 1 of this Annex. Based on the results of the examination of the cargo, a member of the
in-country escort and the monitoring team leader or an authorized representative of such a team shall
draw up and sign a joint inventory of the equipment and supplies to reflect items actually delivered.
After the joint inventory has been signed, the monitors shall have the right to begin using the cleared
equipment, subject to the provisions of paragraph 25 of Section XVI of this Protocol, and the cleared
supplies, at the facility subject to continuous monitoring or monitored facility. 

5. Until the joint inventory referred to in paragraph 4 of this Annex is signed, the inspected Party shall
assist the inspecting Party in providing security and protection from inclement weather for the cargo.
For that purpose the inspected Party shall provide storage areas for the equipment and supplies. If the
examination of cargo is conducted at the facility subject to continuous monitoring or monitored facility,
the inspected Party may conduct that examination in the building for the storage of equipment and
supplies provided for in paragraph 23 of Section XVI of this Protocol. A storage method shall be used
that requires the presence of representatives of both Parties for access to the equipment or supplies. 

6. If the examination of the cargo is carried out at the point of entry or at the airport associated
with the facility subject to continuous monitoring or monitored facility, upon completion of the
examination procedures, the inspecting Party shall repack the cargo, unless otherwise agreed
within the framework of the Joint Compliance and Inspection Commission. The inspected Party,
at the request of the inspecting Party, shall assist the inspecting Party in repacking the cargo.
(JCIC Agreement No. 5, Article 2) If the examination of the cargo is conducted at the point of entry or
at the airport associated with the facility subject to continuous monitoring or monitored facility, the
inspected Party at the request of the inspecting Party shall assist the inspecting Party in providing for the
security of the equipment and supplies during loading and unloading operations, in fastening the cargo for
shipment, and in protecting the cargo from inclement weather. After the cargo has been packed, it shall
be sealed with seals of each of the Parties. Upon arrival of the cargo at the facility subject to continuous
monitoring or monitored facility, the monitoring team leader and a member of the in-country escort shall
jointly examine the seals. The monitors shall open each shipping container and modular structure in the
presence of the in-country escort. 

7. The monitors shall have the right to observe palletized or oversize items of cargo, including modular
structures, at the point of entry and at each point where they are transferred from one vehicle to
another, including: observing the loading of such items of cargo onto the vehicles that will transport them
to the facility subject to continuous monitoring or monitored facility or to an intermediate transfer point;
observing the transfer of such items of cargo at an intermediate transfer point; and observing such items
of cargo at the facility subject to continuous monitoring or monitored facility after the vehicles carrying
such cargo arrive there. In the event of unforeseen delays, the monitors shall have the right to observe
such items of cargo that are inside vehicles while such items of cargo are in transit. 

8. If during the examination of cargo, or at any time during installation, operation, or maintenance of
equipment, the in-country escort concludes that an item of equipment or supplies can perform, or does
perform, functions unconnected with the requirements of continuous monitoring activities, such an item
of equipment or supplies shall be impounded at the location of the examination. A member of the
in-country escort shall explain to the monitoring team leader, or authorized representative of such a
team, the reasons for such a conclusion. If the monitoring team leader, or authorized representative of
such a team, disagrees with the conclusion of the member of the in-country escort, the monitoring team
leader, or authorized representative of such a team, may explain the appropriateness of the item of
equipment or supplies to the requirements of continuous monitoring activities. If the member of the
in-country escort remains convinced of the original conclusion, that member of the in-country escort and
the monitoring team leader, or authorized representative of such a team, shall record their views in a
joint document, and each of them shall retain a copy of the document. The Parties may resolve
disagreements on the use of impounded equipment or supplies through diplomatic channels, within the
framework of the Joint Compliance and Inspection Commission, or by other methods agreed by the
Parties. Equipment and supplies impounded at the point of entry or at the airport associated with a
facility subject to continuous monitoring or monitored facility shall not be brought to such a facility.
Equipment impounded at such a facility shall either not be installed or its use shall be discontinued, and
supplies impounded at such a facility shall not be used. Unless the inspected Party informs the inspecting
Party of a different decision, such equipment or supplies shall be removed from the territory of the
inspected Party. If necessary, the inspected Party shall assist the inspecting Party in delivering such
equipment or supplies to the point of entry or airport associated with the facility subject to continuous
monitoring or monitored facility. At the choice of the inspected Party, prior to removal from the territory
of the inspected Party, such equipment or supplies shall be stored at the point of entry, at the airport
associated with the facility subject to continuous monitoring or monitored facility, or directly at such a
facility. A storage method shall be used that requires the presence of representatives of both Parties for
access to the impounded equipment or supplies. 

ANNEX 8 

EQUIPMENT FOR INSPECTIONS AND CONTINUOUS MONITORING ACTIVITIES 

I. Characteristics of equipment for baseline data inspections, data update inspections, new
facility inspections, suspect-site inspections, post-dispersal inspections of deployed mobile
launchers of ICBMs and their associated missiles, conversion or elimination inspections,
close-out inspections, and formerly declared facility inspections conducted pursuant to
paragraphs 2, 3, 4, 5, 7, 8, 9, and 10 of Article XI of the Treaty. 

A. For the United States of America: 

1. Linear Measurement Devices (quantity for each inspection team): 

(a) 5 30-meter measuring tapes; 

(b) 10 3-meter measuring tapes; 

(c) 2 3-meter measuring sticks; 

(d) 10 Plumb bobs; 

(e) 2 Plumb bob cords; 

(f) 10 Plumb bob targets; 

(g) 1 Roll tape; and 

(h) 1 Inspection suitcase. 

2. Camera Equipment (quantity for each inspection team): 

(a) 1 Camera with flash; 

(b) 1 Lens; 

(c) 1 Flash; 

(d) 1 Exposure meter; 

(e) 1 Spare film back for camera:

(f) 1 Tripod; 

(g) 1 Cable release; 

(h) 8 Packs of photographic film; 

(i) 10 Spare batteries for cameras, flash, and exposure meter; 

(j) 1 Range rod point; 

(k) 1 Camera case;

(l) 1 Package of lens tissue; 

(m) 1 Lens brush; 

(n) 1 2.5-meter range rod; and 

(o) 2 Lens filters--one ultraviolet haze, one amber. 

3. Other Portable Equipment (quantity for each inspector): 

(a) 1 Flashlight (safety approved), with spare batteries and spare bulb;

(b) 1 Magnetic compass; 

(c) 1 Pocket calculator with spare batteries; 

(d) 1 Roll of tamper-indicating tape seals; 

(e) 1 Thermoluminescent dosimeter; and 

(f) 1 Ionization dosimeter. 

4. Other Portable Equipment (quantity for each inspection team): 

(a) 2 Ionization dosimeter charger units;

(b) 2 Satellite system receiver sets, each provided by the inspected Party and consisting of the
following: 

(i) 1 Portable receiver; 

(ii) 1 Direct current adapter (external); 

(iii) 16 Spare batteries; 

(iv) 1 Battery holder; 

(v) 1 Rechargeable nickel-cadmium battery pack ; 

(vi) 1 External antenna with cable and antenna installation kit; 

(vii) 2 Instruction manuals, one in English and one in Russian; 

(viii) 1 Container; and 

(ix) 1 Equipment bag. 

(c) Set of radiation detection equipment consisting of the following: 

(i) 2 Neutron detectors, including preamplifiers with signal/power cables (counting time - 150
seconds); 

(ii) 2 Electronic counters with instruction manual; 

(iii) 10 Plastic bags for weather protection; 

(iv) 1 Americium-241-Lithium neutron source for calibration, emitting approximately 3000
neutrons per second, precalibrated by the inspecting Party; 

(v) 1 Tool kit; 

(vi) 30 Spare batteries, miscellaneous, sizes; 

(vii) 1 Stand for neutron detector; 

(viii) 1 Measuring tape; 

(ix) 2 Battery-powered lights; 

(x) 3 Programmable calculators with instruction manual and; 

(xi) 2 Thermometers; 

(xii) 1 Stand for calibration source; and 

(xiii) 4 Instruction manuals, two in English and two in Russian. (JCIC Agreement No. 40, Article 1,
Para. 1)

B. For the Union of Soviet Socialist Republics: 

1. Linear Measurement Devices (quantity for each inspection team):

(a) 5 30-meter measuring tapes; 

(b) 5 5-meter measuring tapes; 

(c) 2 3-meter measuring sticks, 

(d) 4 Plum bobs; 

(e) 2 plumb bob cords; 

(f) 4 Plumb bob targets; 

(g) 1 Roll of tape; and

(h) 1 Inspection suitcase

2. Camera Equipment (quantity for each inspection team): 

(a) 1 Camera with flash; 

(b) 1 Tripod; 

(c) 1 Exposure meter; 

(d) 1 Len; 

(e) 1 Flash; 

(f) 1 Spare film back for camera; 

(g) Cable release; 

(h) 2 Packs of photographic film; 

(i) 10 Spare batteries for cameras, flash, and exposure meter; 

(j)1 Range rod point; 

(k) 1 Camera case; 

(l) 1 Package of lens tissue; 

(m) 1 Lens brush; 

(n) 1 3-meter range rod; and 

(p) 2 Lens filters--one ultraviolet haze, one amber. 

3. Other Portable Equipment (quantity for each inspector): 

(a) 1 Flashlight (safety approved), with spare batteries and spare bulb; 

(b) 1 Magnetic compass; 

(c) 1 Pocket calculator with spare batteries; 

(d) 1 Roll of tamper-indicating tape seals; 

(e) 1 Ruler; and 

(f) 1 Thermoluminescent dosimeter

4. Other Portable Equipment (quantity for each inspection team): 

(a) 2 Satellite system receiver sets provided by the inspected Party, each consisting of the
following: 

(i) 1 Portable receiver; 

(ii) 1 Direct current adapter (external); 

(iii) 16 Spare batteries; 

(iv) 1 Battery holder; 

(v) 1 Rechargeable nickel-cadmium battery pack; 

(vi) 1 External antenna with cable and antenna installation kit; 

(vii) 2 Instruction manuals, one in English and one in Russian; 

(viii) 1 Container; 

(ix) 1 Equipment bag. 

(b) Set of radiation detection equipment consisting of the following: 

(i) 1 Neutron detector, including preamplifiers with signal/power cables, (counting time - 1000
seconds or 150 seconds); 

(ii) 1 Registering device; 

(iii) 1 Americium-241-Lithium neutron source for calibration, emitting approximately 3000
neutrons per second, precalibrated by the inspecting Party; 

(iv) 1 Charging unit; 

(v) 1 Spare rechargeable battery 

(vi) 1 Measuring tape; 

(vii) 1 Battery-powered light; 

(viii) 1 Stands for neutron detector; 

(ix) 1 Calculator; 

(x) 1 Stand for calibration source; and 

(XI) 2 Instruction manuals, one in English and one in Russian. (JCIC Agreement, Article II, Para.
1)

II. Characteristics of equipment for reentry vehicle inspections conducted pursuant to
paragraph 6 of Article XI of the Treaty. 

A. For the United States of America: 

1. Portable Equipment (quantity for each inspector):

(a) 1 3-meter measuring tape;

(b) 1 Flashlight (safety approved), with spare batteries and spare bulb;

(c) 1 Pocket calculator with spare batteries;

(d) 1 Magnetic compass;

(e) 1 Roll of tamper-indicating tape seals;

(f) 1 Thermoluminescent dosimeter; and

(g) 1 Ionization dosimeter.

2. Other Portable Equipment (quantity for each inspection team):

(a) 2 Ionization dosimeter charger units;

(b) 2 Satellite system receiver sets, each provided by the inspected Party and consisting of the
following:

(i) 1 Portable receiver;

(ii) 1 Direct current adapter (external);

(iii) 16 Spare batteries;

(iv) 1 Battery holder;

(v) 1 Rechargeable nickel-cadmium battery pack;

(vi) 1 External antenna with cable and antenna installation kit;

(vii) 2 Instruction manuals, one in English and one in Russian;

(viii) 1 Container; and

(ix) 1 Equipment bag.

(c) Set of radiation detection equipment consisting of the following:

(ii) 2 Electronic counters, with instruction manual;

(iii) 10 Plastic bags for weather protection;

(iv) 1 Americium-241-Lithium neutron source for calibration, emitting approximately 3000
neutrons per second, precalibrated by the inspecting Party;

(v) 1 Tool kit;

(vi) 30 Spare batteries, miscellaneous sizes;

(vii) 1 Stand for neutron detector;

(viii) 1 Measuring tape;

(ix) 2 Battery-powered lights;

(x) 3 Programmable calculators with instruction manual;

(XI) 2 Thermometers;

(xii) 1 Stand for calibration source; and

(xiii) 4 Instruction manuals, two in English and two in Russian."(JCIC Agreement, Article I, Para.
2)

B. For the Union of Soviet Socialist Republics: 

1. Portable Equipment (quantity for each inspector):

(a) 1 5-meter measuring tape;

(b) 1 Flashlight (safety approved), with spare batteries and spare bulb;

(c) 1 Magnetic compass;

(d) 1 Pocket calculator with spare batteries;

(e) 1 Roll of tamper-indicating tape seals;

(f) 1 Ruler;

(g) 1 Thermoluminescent dosimeter;

(h) 1 Curvometer; and

(i) 1 Pair of dividers.

2. Other Portable Equipment (quantity for each inspection team):

(a) 2 Satellite system receiver sets provided by the inspected Party, each consisting of the
following:

(i) 1 Portable receiver;

(ii)1 Direct current adapter (external);

(iii)16 Spare batteries;

(iv)1 Battery holder;

(v) 1 Rechargeable nickel-cadmium battery pack;

(vi)1 External antenna with cable and antenna installation kit;

(vii)2 Instruction manuals, one in English and one in Russian;

(viii)1 Container; and

(ix)1 Equipment bag.

(b) Set of radiation detection equipment consisting of the following:

(i) 1 Neutron detector, including preamplifier with signal/power cables (counting time -1000
seconds or 150 seconds);

(ii)1 Registering device;

(iii)1 Americium-241-Lithium neutron source for calibration, emitting approximately 3000
neutrons per second, precalibrated by the inspecting Party;

(iv)1 Charging unit;

(v) 1 Spare rechargeable battery;

(vi)1 Measuring tape;

(vii)1 Battery-powered light;

(viii) 1 Stand for neutron detector;

(ix)1 Calculator;

(x) 1 Stand for calibration source;

(XI) 2 Instruction manuals, one in English and one in Russian.(JCIC Agreement No. 40, Article II,
Para. 2)

III. Characteristics of equipment for inspections during technical characteristics exhibitions
conducted pursuant to paragraph 11 of Article XI of the Treaty. 

A. For the United States of America: 

1. Linear Measurement Devices (quantity for each inspection team):

(a) 3 Measuring tape clamps;

(b) 2 Tape tensioning scales;

(c) 2 Magnifying glasses;

(d) 2 Hand levels;

(e) 2 String line levels;

(f) 2 Calipers with micrometer screw;

(g) 2 Combination squares;

(h) 5 30-meter measuring tapes;

(i) 10 3-meter measuring tapes;

(j) 2 3-meter measuring sticks;

(k) 3 Plumb bobs;

(l) 1 Plumb bob cord;

(m) 10 Plumb bob targets;

(n) 3 Rolls of tape;

(o) 3 Log books;

(p) 2 Rod levels;

(q) 2 2.5-meter range rods; and

(r) 1 Tripod.

2. Camera Equipment (quantity for each inspection team):

(a) 2 Cameras with flash;

(b) 1 Lens;

(c) 1 Flash;

(d) 1 Exposure meter;

(e) 1 Spare film back for camera;

(f) 1 Tripod;

(g) 1 Cable release;

(h) 8 Packs of photographic film;

(i) 10 Spare batteries for cameras, flash, and exposure meter;

(j) 1 Range rod point;

(k) 1 Camera case;

(l) 1 Package of lens tissue;

(m) 1 Lens brush;

(n) 1 2.5-meter range rod; and

(o) 2 Lens filters--one ultraviolet haze, one amber.

3. Other Portable Equipment (quantity for each inspector):

(a) 1 Flashlight (safety approved), with spare batteries and spare bulb;

(b) 1 Magnetic compass;

(c) 1 Pocket calculator with spare batteries;

(d) 1 Roll of tamper-indicating tape seals;

(e) 1 Thermoluminescent dosimeter; and

(f) 1 Ionization dosimeter.

4. Other Portable Equipment (quantity for each inspection team):

(a) 2 Ionization dosimeter charger units.

5. Weighing Devices (as agreed by the Parties within the framework of the Joint Compliance and
Inspection Commission for the purpose of confirming the launch weight of an ICBM or SLBM of
a new type).(JCIC Agreement No. 40, Article I, Para. 3)

B. For the Union of Soviet Socialist Republics: 

1. Linear Measurement Devices (quantity for each inspection team):

(a) 5 30-meter measuring tapes;

(b) 5 5-meter measuring tapes;

(c) 2 3-meter measuring sticks;

(d) 4 Plumb bobs;

(e) 2 Plumb bob cords;

(f) 4 Plumb bob targets;

(g) 1 Roll of tape; and

(h) 1 Inspection suitcase.

2. Camera Equipment (quantity for each inspection team):

(a) 2 Cameras with flash;

(b) 1 Tripod;

(c) 1 Exposure meter;

(d) 1 Lens;

(e) 1 Flash;

(f) 1 Spare film back for camera;

(g) 1 Cable release;

(h) 2 Packs of photographic film;

(i) 10 Spare batteries for cameras, flash, and exposure meter;

(j) 1 Range rod point;

(k) 1 Camera case;

(l) 1 Package of lens tissue;

(m) 1 Lens brush;

(n) 1 3-meter range rod; and

(o) 2 Lens filters--one ultraviolet haze, one amber.

3. Other Portable Equipment (quantity for each inspector):

(a) 1 Flashlight (safety approved), with spare batteries and spare bulb;

(b) 1 Magnetic compass;

(c) 1 Pocket calculator with spare batteries;

(d) 1 Roll of tamper-indicating tape seals;

(e) 1 Ruler; and

(f) 1 Thermoluminescent dosimeter.

4. Weighing device (as agreed by the Parties within the framework of the Joint Compliance and
Inspection Commission for the purpose of confirming the launch weight of an ICBM or SLBM of
a new type).(JCIC Agreement No. 40, Article II. Para. 3)

IV. Characteristics of equipment for inspections during heavy bomber distinguishability
exhibitions and heavy bomber baseline exhibitions conducted pursuant to paragraphs 12 and
13 of Article XI of the Treaty and during exhibitions of long-range non-nuclear ALCMs
conducted pursuant to notifications provided in accordance with Section VII of the Notification
Protocol.(JCIC Agreement No. 25, Article 1, Para. 1)

A. For the United States of America: 

1. Linear Measurement Devices (quantity for each inspection team):

(a) 3 Measuring tape clamps;

(b) 2 Tape tensioning scales;

(c) 2 Magnifying glasses;

(d) 2 Hand levels;

(e) 2 String line levels;

(f) 2 Calipers with micrometer screw;

(g) 2 Combination squares;

(h) 5 30-meter measuring tapes;

(i) 10 3-meter measuring tapes;

(j) 2 3-meter measuring sticks;

(k) 3 Plumb bobs;

(l) 1 Plumb bob cord;

(m) 10 Plumb bob targets;

(n) 3 Rolls of tape;

(o) 3 Log books;

(p) 2 Rod levels;

(q) 2 2.5-meter range rods; and

(r) 1 Tripod.

2. Camera Equipment (quantity for each inspection team):

(a) 2 Cameras with flash;

(b) 1 Lens;

(c) 1 Flash;

(d) 1 Exposure meter;

(e) 1 Spare film back for camera;

(f) 1 Tripod;

(g) 1 Cable release;

(h) 8 Packs of photographic film;

(i) 10 Spare batteries for cameras, flash, and exposure meter;

(j) 1 Range rod point;

(k) 1 Camera case;

(l) 1 Package of lens tissue;

(m) 1 Lens brush;

(n) 1 2.5-meter range rod; and

(o) 2 Lens filters--one ultraviolet haze, one amber.

3. Other Portable Equipment (quantity for each inspector):

(a) 1 Flashlight (safety approved), with spare batteries and spare bulb;

(b) 1 Magnetic compass;

(c) 1 Pocket calculator with spare batteries;

(d) 1 Roll of tamper-indicating tape seals;

(e) 1 Thermoluminescent dosimeter; and

(f) 1 Ionization dosimeter.

4. Other Portable Equipment (quantity for each inspection team):

(a) 2 Ionization dosimeter charger units; and 

(b)Set of radiation detection equipment consisting of the following:

(i) 2 Neutron detectors, including preamplifiers with signal/power cables (counting time -150
seconds);

(ii) 2 Electronic counters, with instruction manual;

(iii) 10 Plastic bags for weather protection;

(iv) 1 Americium-241-Lithium neutron source for calibration, emitting approximately 3000
neutrons per second, precalibrated by the inspecting Party;

(v) 1 Tool kit;

(vi) 30 Spare batteries, miscellaneous sizes;

(vii) 1 Stand for neutron detector;

(viii) 1 Measuring tape;

(ix) 2 Battery-powered lights;

(x) 3 Programmable calculators with instruction manual;

(XI) 2 Thermometers;

(xii) 1 Stand for calibration source; and

(xiii) 4 Instruction manuals, two in English and two in Russian."(JCIC Agreement No. 40, Article I,
Para. 4)

B. For the Union of Soviet Socialist Republics: 

1. Linear Measurement Devices (quantity for each inspection team):

(a) 5 30-meter measuring tapes;

(b) 5 5-meter measuring tapes;

(c) 2 3-meter measuring sticks;

(d) 4 Plumb bobs;

(e) 2 Plumb bob cords;

(f) 4 Plumb bob targets;

(g) 1 Roll of tape; and

(h) 1 Inspection suitcase.

2. Camera Equipment (quantity for each inspection team):

(a) 2 Cameras with flash;

(b) 1 Tripod;